Mission Critical Cooling Products

We provided this new to one of our repeat customers, who wanted to quickly upgrade to a 10 ton outdoor rated unit; so we have this back in trade. This is a nice, basic indoor chiller, with a process temp range of 42°F to 72°F. Arrived at KIG in October 2020 is a perfect General Air Products 14 ton Air Cooled Chiller. Our 30-ton air-cooled screw chiller is just what you need for anodizing applications. Even if you find your current cooling method is working, we are confident you will find using our industrial screw chillers for your cooling needs will be far more convenient and efficient. Plating — either electroplating or electroless plating — is becoming a major industry as more industries are looking for metal finishing experts to complete their products. Plating metal requires a tremendous amount of heat, which you then must remove. You need strong industrial screw chillers for that kind of job, which is just what we provide.

The difference between air cooled and water cooled chillers is that air chillers use ambient air as the condensing source and a fan that moves the air over the coil. Water chillers on the other hand use water as the condensing source and a pump that circulates water through the condenser out to the cooling tower that releases it into the atmosphere. This GCI Icewagon 13 ton Air Cooled Chiller arrived into KIG’s shop in May 2014. We have cleaned and painted the unit, and done any repairs and checks as needed. It has been run and tested and was offered with a money back guarantee. It is 460 Volt, has a Danfoss/Maneurop 13 hp sealed reciprocating compressor which we have had great luck with on chillers in the past. Chiller has hot gas bypass option so as to keep compressor running a bit longer when there is a lower load on the system, which reduces the amounts of starts and stops on the system. This unit does not have an on-board reservoir tank, but could easily integrate with your storage/buffer tank as the inlet to the chiller goes right to the suction side of pump.

fan coil unit manufacturers

While the water-cooled chiller may be more energy-efficient, it receives stiff competition from air-cooled chiller in terms of installation cost, maintenance cost, number of equipment, and several other aspects. Most importantly, air-cooled chillers avoid water consumption so they are the ideal alternatives in areas with water scarcity or areas with cheap energy but costly water fees. Give us a call today for the most specialized and customized attention. If you enjoyed this post, you maybe want to know different heat rejection condensing technologies. Air-cooled chillers are refrigeration systems used in both commercial and industrial facilities to cool fluids and/or dehumidify air. They are used in a wide variety of settings including hotels, corporate events, restaurants, sporting events, large-scale construction, industrial and manufacturing plants, and so forth.

However, the annual comprehensive cost of air-cooled screw chiller is basically the same as that of water-cooled units. As mentioned above, when a chiller comes with a screw compressor, it will be named a screw chiller. Water-cooled screw chillers use water consumption whereas air-cooled screw chillers need air ventilation. They work under similar principles to finish the heat transfer but they use different components to cool the condensers. In the meantime, the water temperature cools down when the heat is extracted by the refrigerant. The shell and tube evaporator is designed to collect the waste heat from the outside and transfer it into the refrigerant.

To complete the continuous cycle, the refrigerant flows back over the chilled water coils and absorbs more heat. Water and air are the main heat rejection mediums for air conditioning systems. When water is plentiful and inexpensive, a water-cooled system, often involving a cooling tower, becomes the most efficient option. If water is unavailable or expensive, air-cooled systems become preferable. ARANER has a wide range of heat rejection systems for all applications. The solutions offer state-of-the-art technology that suits all environments and other requirements. Water-cooled chillers use water to surround the refrigerant pipes and draw in the heat . The water is then pumped into a cooling tower to release the heat.

Industry-leading knowledge of free-cooling allows us to deliver the most energy efficient chillers on the market; Turbocor compressor technology provides the energy saving benefits of virtually year round free-cooling. A professional chiller factory with all types of air chiller, water chiller,glycol chiller and screw chiller supplier from China. The chilled water provided by air-cooled chillers is used to cool down the water, and the water temperature will be immune to the temperature around, so as to ensure the quality of pasta and food products. This is why Air Cooled Chiller Used for Pasta and food industries. TopChiller is a leader of manufacturing air cooled chiller and we provide the ultimate air cooled chiller solutions for clients all over the world. Air cooled chillers as the refrigeration machines play an important role in various industrial applications and production process.

Chillers for industrial applications can be centralized, where a single chiller serves multiple cooling needs, or decentralized where each application or machine has its own chiller. It is also possible to have a combination of both centralized and decentralized chillers, especially if the cooling requirements are the same for some applications or points of use, but not all. When the chillers for air conditioning systems are not operable or they are in need of repair or replacement, emergency chillers may be used to supply chilled water. Rental chillers are mounted on a trailer so that they can be quickly deployed to the site. Large chilled water hoses are used to connect between rental chillers and air conditioning systems. When the refrigerant enters into the condenser, it will run along the horizontal pipes and transfer its thermal energy into the ambient air stream which is forced by the fans on top. CX34 ultra-efficient AHRI-Certified R410a reverse cycle air to water chiller w/ DC inverter compressor, DC inverter pump, DC inverter condenser fan, and DC inverter fan coils. A typical dry cooling system is designed as a dual unit system comprised of outdoor and indoor aspects linked by a fluid pump. Both a dry cooler and chiller can be used in similar process applications to attain optimal temperatures. However, like the differences in a chiller vs heat exchanger, there are significant differences in how dry coolers and chillers function.

A case study on the secondary loop refrigeration system with the cooling efficiency lifted by high-performance brine chillers and evaporative condensers. Kaltra made available its Lightstream Freecool chillers now with refrigerant R513a in capacity range from 600 to 1250kW. Kaltra introduces air-cooled chillers in the capacity range from 170 to 1550kW adopted for use with refrigerant R450a, a lower GWP mixture of R134a and HFO1234ze. Kaltra has extended the capacity range of its Lightstream Freecool inverter chiller to 1800kW of refrigeration. Lightstream Freecool chiller lineup was introduced in 2017, initially with a capacity range of 450 to 1200kW. Kaltra extends the portfolio of low-GWP chillers with the launch of Lightstream Scroll range based on its Versa platform and operating on refrigerant R32.

These fans represent the main difference between air cooled and water cooled chillers. As they move air across the condenser, unwanted heat is removed from the system so the cycle can start all over again. Air cooled chillers are located externally to a facility and have condenser coils cooled by fan-driven air. Water cooled chillers are usually located internally and water is recycled to a heat sink or external cooling method. The external cooling method can include a cooling tower or in some cases, a water fed cooling system, which is more efficient at heat rejection. Water Cooled chillers are also used frequently to refrigerate facilities of all kinds, cooling products and machinery among other applications. Water Cooled chillers often are used with a cooling tower or adiabatic system. Our TECOCHILL® “RT Series” product line offers air-cooled engine-driven packaged chillers with 50 tons of cooling capacity.

Founded by three colleagues with over 75 years of experience in the plastic industry, Universal Chilling Systems produces units that include all major components in an efficient design. Available applications include air cooled, low temperature, and water cooled, with typical capacities ranging from 5 to 40 tons. An Air cooled chiller system is designed to use ambient air surrounding the condensing unit to cool a refrigerant back into a liquid once it has absorbed heat from the process. Portable, air cooled style chillers refers to a configuration that contains a refrigeration circuit, a reservoir and pump, along with controls. When taking a deeper look into air cooled chillers versus water cooled chillers, it is recommended to consider the entire operating costs associated with each chiller system. Our line of modular air cooled glycol chillers are similar to our packaged air cooled chillers except that their unique design allows for a more customized approach to your applications. Some cooling processes already have a pumping mechanism in place or a storage tank in-line. In those instances our modular air cooled glycol chillers can be a money and energy saving alternative in that they can be ordered with or without these components installed. ICS Chillers offers a full range of industrial air cooled chiller packages.

Dual refrigeration circuits, with 1 circuit having hot gas bypass . Arrived at KIG in September 2016 was this perfect late model 40 ton Air Cooled Chiller. It has been professionally de-commissioned and has silver soldered caps on the both the chiller side and condenser side refrigerant lines. Each of the 4 condenser fans have adjustable pressure-based fan switching to tweak your outdoor year-round cooling needs even in low ambient. KIG has confirmed with Arcti Chill service that this unit can be adjusted to 28°F Glycol fluid temps with some Carel controller setting adjustments. The indoor section of the chiller features a robust shell/tube exchanger, dual 20hp Copeland Compressors, an insulated 250 gallon reservoir, and a 5 hp process pump. Arrived at KIG in October 2014 was this 2007 Trane Intellipak 30 ton Air Cooled Chiller.

Leave a Reply

Your email address will not be published. Required fields are marked *